|2223: CCU 8 FT 6 IN WHEELBASE|
Carriage Compensation Unit
These etched brass units for bogie vehicles provide a suspension system with the following characteristics:-
• Ability to compensate for changes in vertical track alignment and any degree of cant.
• Enhanced stability of vehicle body and bogies.
• Free running to allow scale length trains to be hauled.
They consist of an etched brass 'outside bearing' subframe which will accept standard bearings and wheelsets from Gibson, Jackson, Maygib, Ultrascale, etc. The CCU is mounted on the coach underframe using a press stud which is supplied. This arrangement allows the bogie to be attached and removed easily. Alex Jackson couplings may also be fitted. To finish the bogie the modeller must provide bearings and wheelsets to the appropriate gauge and cosmetic side frames. MJT cosmetic bogie sideframes MJT 2411 LNER 8ft 6in standard, MJT 2439 BR B5(S), MJT 2412 LNER 8ft 6in Heavy Duty, MJT 2431 BR Standard, MJT 2434 BR Commonwealth and MJT 2455 BR Mk.4 Power Bogie are suitable for use with this CCU but any sideframes with the correct wheelbase can be accommodated provided the rear face is filed flat.
Brass Pin Point bearings - waisted (MJT 4009) and shouldered (MJT 4010) - are suitable for use with this CCU.
Also available in 3 mm (1:100) scale MJT 22233.
(OO Gauge / 4mm Scale)
A fuller description of this item is given in the assembly instrucuions which can be downloaded here.
Temporarily Out of Stock
Return to List